Perfit ZR · US dental labs

Japanese powder.Made in Korea.

Vatech is the brand US dentists already know and trust. Perfit ZR discs list at $45–$110 each, and your account is priced below the invoice you already pay.

Vatech Perfit ZR discs, Perfit FS, and coloring liquids
5Perfit ZR disc lines, UT through multilayer
98ØStandard disc format stocked by Ultran
16VITA classical Pre-Shade shades

Choose by indication, not guesswork

UT through multilayer, stocked by Ultran. After approval, sintering schedules and shade guides are in the portal.

Perfit ZR UT disc, shade A2, 98 by 12 mm

ZR UT

Ultra Translucent

Translucency50%Strength800 MPa

Highest translucency in the lineup — anterior aesthetics where light transmission matters most.

WhitePre-ShadeAnterior crownVeneer
Perfit ZR ST disc, shade A3, 98 by 18 mm

ZR ST

Standard Translucent

Translucency46%Strength1,100 MPa

The workhorse disc — versatile strength and aesthetics across most single-unit and bridge cases.

WhitePre-ShadeMultilayerAnterior crownPosterior crown
Perfit ZR HT disc, white, 98 by 14 mm

ZR HT

High Strength

Translucency42%Strength1,300 MPa

Maximum strength for posterior load and long-span restorations where durability comes first.

WhitePre-ShadePosterior crownLong-span bridge
Perfit ZR STML multilayer disc, shade A3.5, 98 by 14 mm

ZR STML

Single-shade Multilayer

Translucency46%Strength1,100 MPa

Built-in shade gradient in one disc — less staining time, consistent 4Y-TZP through the stack.

MultilayerAnterior / posterior crownMonolithic bridge
Perfit ZR TSML multilayer disc, shade A1, 98 by 18 mm

ZR TSML

Translucent-to-Strong Multilayer

Translucency46–50%Strength800–1,100 MPa

Incisal translucency (5Y) meets cervical strength (4Y) — best aesthetic outcome in multilayer.

MultilayerAnterior crownPremolar cases
Perfit FS fully sintered zirconia blocks, shade C14 A2

Perfit FS

Full-contour zirconia

Pre-shaded fully sintered blocks for full-contour workflows — I12, C14, and C16, including multilayer options.

I12 ShadeC14 ShadeC14 MultilayerC16 ShadeC16 Multilayer
Full detailView specsMaterial origin, disc layers, shades, and how Perfit comparesOpenClose

Premium Japanese powder. Made in Korea.

Perfit ZR discs are manufactured in Korea by Vatech MCIS using premium Japanese zirconia powder from Daiichi Kigenso — one of the most trusted raw-material suppliers in dental zirconia.

That combination matters on the bench: Japanese powder grade for translucency and strength consistency, plus Korean manufacturing under Vatech’s Perfit program with documented sintering behavior across UT, ST, HT, and multilayer lines.

Daiichi Kigenso powder

Premium Japanese yttria-stabilized zirconia raw material — the same tier many high-end disc brands build on.

Vatech MCIS manufacturing

Made in Korea under the Perfit brand — Uniform Compaction Firing, VITA-aligned shades, and a full UT→HT lineup from one manufacturer.

Why labs care

Predictable shrinkage, flexural strength by indication, and batch-to-batch aesthetics — not commodity disc roulette.

Designed to read like natural enamel

Perfit ZR is positioned for labs that need predictable translucency, shade depth, and multilayer behavior — the same material Ultran stocks and supports in the US.

50%

Translucency

Perfit ZR UT at 1 mm — spectrum-matched for natural anterior work.

CIP

Uniform compaction

Controlled pore generation for stable milling surfaces and less chipping.

20+

Years of R&D

Vatech MCIS manufacturing with Daiichi Kigenso Japanese raw material.

Lab technician staining a Perfit ZR restoration

See the layers before you mill

Schematic cross-sections for each Perfit ZR line, plus the VITA shade range on Pre-Shade and multilayer discs.

Top viewInterlocking zone boundariesSide cross-section (schematic)ZR STML4Y-TZP

ZR STML

Single-shade Multilayer · 4Y gradient

Five interlocking 4Y zones — gear-mesh boundaries blend cervical to incisal for natural shade flow without manual buildup.

  • Incisal
  • Layer 2
  • Layer 3
  • Layer 4
  • Cervical

Pre-Shade & multilayer shades

16 VITA classical shades on ST / HT / UT Pre-Shade, plus BL1 & BL3 on multilayer lines. Full coloring and sintering charts live in portal Material Support.

A1
A2
A3
A3.5
A4
B1
B2
B3
B4
C1
C2
C3
C4
D2
D3
D4
BL1
BL2
BL3
BL4

Swatches are approximate for web display. Match final shade under your lab's curing light.

From your current brand to Perfit ZR

Common US lab materials mapped to the closest Vatech disc — same logic as the Switch Assistant inside Material Support. Your mill, sprues, and cementation usually stay the same; sintering and coloring are what change.

Current brandTypical caseVatech equivalentSinterWhat to watch
BruxZir (Glidewell)Posterior single crownPerfit ZR HTPerfit ZR HT · A2 · 14 mmSet furnace to 1,550°C (not 1,530°C)HT-to-HT: strength and opacity similar. Biggest visible change is inner Snow Light prep on Perfit HT — not your BruxZir coloring habit.
Katana STMLAnterior single crownPerfit ZR TSMLPerfit ZR TSML · A2 · 16 mmSet furnace to 1,530°CMultilayer-to-multilayer (STML/TSML): shade is usually close. CAM positioning matters — shift 1 mm toward incisal if result runs dark.
Katana UTMLAnterior single crownPerfit ZR TSMLPerfit ZR TSML · A1 · 14 mmSet furnace to 1,530°CMultilayer-to-multilayer (STML/TSML): shade is usually close. CAM positioning matters — shift 1 mm toward incisal if result runs dark.
Upcera — Explorer (multilayer)Anterior single crownPerfit ZR TSMLPerfit ZR TSML · A3 · 14 mmSet furnace to 1,530°CUpcera sinter temps vary by line (often 1450–1550°C). Do not copy your old Upcera program — use Perfit temps: HT 1550°C, ST/STML/TSML 1530°C, UT 1500°C.
Aidite — SuperfectZ HTPosterior single crownPerfit ZR HTPerfit ZR HT · A3 · 16 mmSet furnace to 1,550°C (not 1,530°C)Aidite SuperfectZ / 3D lines use brand-specific coloring. Perfit CL liquids may need one case to match your previous intensity — start with cervical body only.
IPS e.max ZirCAD MT (multilayer)Anterior single crownPerfit ZR TSMLPerfit ZR TSML · A2 · 14 mmSet furnace to 1,530°CIvoclar MT/LT maps to Perfit STML/TSML or ST/UT depending on case. MT → TSML for anterior; MO/HT → Perfit HT for posterior.
IPS e.max ZirCAD LTAnterior single crownPerfit ZR UTPerfit ZR UT · BL1 · 14 mmSet furnace to 1,500°C — lower than HT/STIvoclar MT/LT maps to Perfit STML/TSML or ST/UT depending on case. MT → TSML for anterior; MO/HT → Perfit HT for posterior.
Cercon (Dentsply Sirona)3-unit bridgePerfit ZR HTPerfit ZR HT · A2 · 14 mmSet furnace to 1,550°C (not 1,530°C)Cercon ht often maps to Perfit HT. inCoris T3 / multilayer → STML or TSML. Verify furnace hold time (2 hr standard).
ArgenZ (Argen)Posterior single crownPerfit ZR HTPerfit ZR HT · A2 · 14 mmSet furnace to 1,550°C (not 1,530°C)ArgenZ HT → Perfit HT. ArgenZ ST / anterior and Zirlux FC2 often behave like 4Y ST — map to Perfit ST or STML. ArgenZ Esthetic / Zirlux Anterior multilayer → STML or TSML. Confirm mill nest and sinter hold (2 hr) on the first cases.
Zirlux (Argen)Posterior single crownPerfit ZR HTPerfit ZR HT · A2 · 14 mmSet furnace to 1,550°C (not 1,530°C)ArgenZ HT → Perfit HT. ArgenZ ST / anterior and Zirlux FC2 often behave like 4Y ST — map to Perfit ST or STML. ArgenZ Esthetic / Zirlux Anterior multilayer → STML or TSML. Confirm mill nest and sinter hold (2 hr) on the first cases.
VITA YZ (VITA)Posterior single crownPerfit ZR HTPerfit ZR HT · A2 · 14 mmSet furnace to 1,550°C (not 1,530°C)VITA YZ HT → Perfit HT. YZ ST / XT translucent → Perfit ST or UT. YZ coloring liquids differ — expect one pilot case to recalibrate chroma.

Full Switch Assistant in the portal

Pick your exact brand, shade, and thickness — get SKU suggestions, pilot checklist, and fix-it guides for furnace or shade issues. Same data your team sees after approval.

White, Pre-Shade, Multilayer, or FS

SKUs and shades open in the catalog after approval. List prices run $45–$110 a disc, and your account price is set below your current invoice.

FormatBest forThickness range
ZR WhiteDip or brush coloring — full control over chroma and incisal effects. HT, ST, and UT strengths.10 – 25 mm
ZR Pre-Shade16 VITA classical shades factory-applied. Mill, sinter, polish — minimal staining step.10 – 25 mm
ZR MultilayerSTML and TSML gradient discs. Shade-matched cervical-to-incisal without manual buildup.12 – 25 mm
Perfit FSFull-contour discs for high-throughput anterior and posterior production.12 / 14 / 16 mm variants

You will not pay more than you pay today

Perfit ZR discs list at $45–$110 each. Volume adjusts the rate. We price your account below your current supplier invoice, and we confirm that number within 24 hours of the invoice.

Price match

Priced below your current invoice

Perfit ZR discs list at $45–$110 each, adjusted by volume. Send the spec your lab uses most, the brand, and about what you pay per disc. The invoice confirms a number below that, within 24 hours.

  • · You will not pay more than you pay today
  • · Invoice locks the quote — it is not the first step
  • · Account-specific prices apply after approval
See your price →

Open the account in three steps.

Review is usually within 24 hours. Ordering stays on the approved account, on terms.

1

Send your main spec

The brand and disc your lab uses most — line, shade, and thickness — and about what you pay per disc.

2

We price it below that invoice

The invoice locks the number. We reply within 24 hours of receiving it.

3

Order after approval

Account-specific prices stay on the approved catalog. US warehouse delivery is typically 3–5 days.

Shade and count stay on the shelf.

Each disc keeps its shade and quantity on the bench. Low stock is flagged before a case stops.

Start with what you use. The invoice can wait.

The brand, the spec you use most, and about what you pay for it are enough for an estimate. The invoice confirms a number below that price.